When choosing a
dealer for your next steam powered locomotive, be sure that he is very
knowledgeable in the operation and running of live steam. If he is
not, then he wont be able to help you with any problems or questions
you may have with your new loco. Sunset Valley Railroad has 25 years
experience of running steam engines, and is proud to be the Pacific
Northwest dealer for Accucraft Ride-On. If you buy from us, we will be
able to assist you with getting your engine up and running with
maximum performance.
Accucraft 7 ½ gauge Jackson and Sharp
coach. Roof lifts off to allow seating on a wood bench inside. Wood
and metal construction, ball bearing trucks. Available in D&RGW green
or bumblebee yellow. Available fall 2011
Rolling Stock
$3995
Alice is a live steam 0-4-0 engine made
to 1 scale, running on 4 Ύ gauge track. It is coal fired, has
automatic draincocks, hand brake, and hand and axle waterpumps. It
will pull 4 people. Weight 66 lbs
Coal Fired
$6,535
The Plymouth is an 0-4-0 electric switcher
made to 2 ½ scale, running on 7 1/4 or 7 ½ gauge. It has 4 24V
direct drive motors, brakes, marker and head lights, a real air horn
(from an onboard compressor), ammeter and voltmeter, working couplers
with safety chains, and will pull 4 adults up a 2% grade. Available in
yellow or black.
Electric
$3,800
2-4-4- Forney. A 2 ½ scale model of the
popular Forneys that ran on many narrow gauge railroads.The model is
large enough for the driver to sit on the rear tank when driving.
Special care has been taken to get the controls as close as possible
to full size practice, the driving experience should be as good as the
real thing. Available late 2011
SPECIFICATIONS LIVE STEAM
Scale: 2 ½ -Coal fired
Gauge: 7 ½ / 7 Ό
Minimum radius: 20 ft.
Copper Boiler, two cylinders, length: 70, width: 17, height: 26,
Drive wheel: 5.91, lubricator, axle pump, Hand operated water pump,
Pulling load - 4 adults on level track
Coal Fired
$19,500
The 3 truck Shay is under consideration
for future production. It will be coal fired live steam 2 ½ scale on
7 1/2 gauge track Please contact us for further information. (picture
shows the Rainier Scenic Railroad 3 truck Williamette Shay)
Coal Fired
The Fowler is a coal fired road
traction engine of the British BB1 class design. It features the
correct working plough cable drum with clutch and bevel gear drive. It
has a twin cylinder compound engine. The cab controls include pressure
gauge, water level, lubricator and blower, and it has a crankshaft
driven water pump. It will pull one adult. Weight 31 lbs, size 23
long x 8 wide x 12 high.